1SBN050200R1003 ABB RC5-2/440

Gawo Nambala	1SBN050200R1003
Mtundu	ABB
Mayendedwe amoyo	Yogwira
njira yokhazikitsira	Surface mounting
pafupipafupi zolowetsa	240 Pixel
mawonekedwe a wave pa batri	240 Pixel
pafupipafupi pakugwira ntchito kwa batri	240 Pixel
nthawi yeniyeni yowonjezeretsa	240 Pixel
mtundu	240 Pixel

ABB 1SBN050200R1003 ukadaulo, mawonekedwe, magawo.

RC5-2/440 is a RC type surge suppressor designed to reduce the maximum overvoltage peak value and to limit or even completely eliminate the high pre-damping voltage frequencies, when used with an AC operated conventional contactor for a rated control circuit voltage between 250 ... 440 V AC 50/60Hz. The operation of inductive circuits causes overvoltages, in particular on opening of the contactor coil. The electromagnetic energy stored in the coil during contactor closing is restored on opening in the form of surges, the slope and amplitude of which may rise to several kilovolts. A number of drawbacks are observed ranging from interference on the electronic devices to breakdown of insulators and even destruction of certain sensitive components. Advantages: - the surge suppressor is clipped onto the top or side part in regards with the contactor or contactor relay base design without change in device overall dimensions. - very fast clipping: attenuation of steep fronts and thus of high frequencies. No operating delays.